Home / Archives /

Chassis & Suspension

Chassis & Suspension / 3 posts found

Eaton C1 rear springs

C1 Corvette Rear Leaf Spring R&R

by Administrator
Comments are off for this post.
Original C1 Corvette rear springs were made with spring steel with a groove in the bottom side of each spring leaf. This grooved steel has not been produced since the mid-’60s, so the original-style springs with the groove can no longer be made. This predicament could bring many restorations to a standstill, however...
Currie 68-72-A-Body 12-bolt

Bulletproofing a Chevelle 12-bolt with Currie Enterprises

by Administrator
Comments are off for this post.
Many muscle car and restomod enthusiasts want to keep their rides as original as possible right down to the rear axle assembly. Follow along as Currie Enterprises assembles a modernized, disc brake equipped GM 12-bolt rearend for a 64-72 GM A-body.
QA1 shocks

Beyond the Crate Corvette Gets Shocks and Brakes

by Administrator
Comments are off for this post.
A brake upgrade with Baer Brakes Eradispeed rotors and pads put some real bite into the Corvette's stopping power. The Baer Brakes are complemented by QA1 single adjustable street performance shock that can be adjusted for street or drag racing...